CLJ-2803 | Dust Particle Counter

Product Introduction:

Laser dust particle counter is a measuring instrument used to detect the cleanliness level of air. At the same time, the number of dust particles in eight particle size channels was measured, and the number and changes of particles in the eight particle size channels were observed. This meets the technical requirements of the JJF1190-2008 "Dust Particle Counter Calibration Specification" issued by the National Bureau of Metrology, and conforms to the standard IS014644 and 2010 version GMP. The whole machine function is controlled and processed by a microcomputer, which can directly analyze data and print detection results.

Product features:

1. Touch screen control operation, large screen touch screen display, user-friendly interface, easy to operate

2. Calculate based on 95% confidence level (UCL), automatically determine purification level, threshold alarm

3. Can store 5000 sets of data and support historical data operations.

4. The chassis material is 304 stainless steel plate, which is resistant to chemical corrosion, beautiful and easy to clean.

5. Built in thermal printer

6. Adopting imported high flow semiconductor laser tubes and imported semiconductor photosensitive receiving tubes

7. Support direct export of data via WIFI

8. Seven inch (1024 * 600 IPS) capacitive touch screen

Product parameters:

Electrical parameters: 220VAC 50Hz

2. Dimensions: 220 * 350 * 260mm

3. Sampling volume: 28.3L/min (1cfm)

4. Working temperature: 10 ° C-35 ° C

5. Working humidity: ≤ 75%

6. Power: 150W

7. Eight particle size channels: 0.3, 0.5, 0.7, 1.0, 2.0, 3.0, 5.0, 10.0 (μ m)

8. Vacuum source: built-in air pump, flow control

9. Light source and lifespan: Semiconductor laser>30000 hours

10. Self purification time: ≤ 10 minutes

11. Communication interface: USB, 495, Ethernet communication

12. Detection range: Level 100 to 300000