CLJ-2083 | Dust Particle Counter

Product Introduction:

Laser dust particle counter is a measuring instrument used to detect the cleanliness level of air. At the same time, the number of dust particles in six particle size channels was measured, and the number and changes of particles in the six particle size channels were observed, which meets the technical requirements of the JJF1190-2008 "Dust Particle Counter Calibration Specification" of the National Bureau of Metrology. The entire machine is controlled and processed by a microcomputer, and can directly analyze data and print detection results.

Product features:

1. Touch screen control operation, large screen touch screen display, user-friendly interface, easy to operate

2. Calculated with a 95% confidence level (UCL), it can directly display particle concentration (particles/cubic meter) and automatically determine the purification level

3. 4GB data storage card, data storage management, optimized storage space

4. The chassis material is cold-rolled steel plate (treated with rust prevention and electrostatic spraying)

5. Built in thermal printer

6. Adopting imported semiconductor laser tubes and imported semiconductor photosensitive receiving tubes

7. The counting results can be converted into M3 and FT3

8. Seven inch (1024 * 600 IPS) capacitive touch screen

Product parameters:

1. Electrical parameters: 220VAC 50Hz

2. Dimensions: 220 * 280 * 185mm

3. Sampling volume: 2.83L/min (0.1cfm)

4. Working temperature: 10 ° C-35 ° C

5. Working humidity: ≤ 75%

6. Power: 100W

7. Six particle size channels: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 (μ m)

8. Vacuum source: built-in air pump, flow control

9. Light source and lifespan: Semiconductor laser>30000 hours

10. Self purification time: ≤ 10 minutes

11. Communication interface: USB

12. Detection range: Level 100 to 300000