BBS-V800-X | Medical Clean Workstation

1. Technical parameters

1.1 External dimensions: 800mm × 710mm × 1850mm;

1.2 Internal dimensions: 700mm × 575mm × 625mm;

1.3 Filter size: 680mm × 470mm × 69mm;

1.4 Rated power: 650 W;

1.5 Airflow velocity: 0.30-0.45m/s;

1.6 UV lamp power: 20W;

1.7 LED fluorescent lamp power: 8W;

1.8 Front window glass * * opening height: 400mm;

1.9 Safe operating height of front window glass opening: 200-350mm;

1.10 Noise ≤ 65dB (A);

1.11 Workbench to ground height: 750mm;

1.12 Product safety: colony count ≤ 0.5CFU/30min;

1.13 Lighting: ≥ 300lx;

1.14 Gross weight: 140KG;

1.15 Wooden packaging dimensions: 940mm × 980mm × 1350mm;

1.16 Cleanliness level: ISO5 (ISO Class5), 100 (FedEx 209E), Class100 (Fed 209E);

2. Structural characteristics

2.1 Classification of Cleanrooms: Vertical laminar flow, single-sided operation;

2.2 Filtration efficiency: The filters are all high-efficiency filters without partitions, with a filtration efficiency of 99.995% for particles with a diameter of 0.3 μ m;

2.3 Equipped with a pre filter, it can effectively intercept large particles and impurities, effectively extending the service life of high-efficiency filters;

2.4 The front window is designed with a 7 ° tilt angle, which conforms to ergonomic principles and reduces the operator's sense of pressure;

The work area countertop is made of high-quality 304 brushed stainless steel material, which is beautiful, easy to clean, and corrosion-resistant;

2.6 The box is made of high-quality cold-rolled steel plate electrostatic spraying, which is beautiful and stable;

2.7 The control panel adopts a touch switch, with buttons consisting of fan button, lighting button, purple key, power button, socket button, air volume reduction button, and air volume increase button, making it easy to operate; The display screen shows the wind speed of the fan, display time, working time of the ultraviolet lamp, and working time of the filter;

2.8 The initial and high-efficiency filters can be installed on the front side of the cabinet without the need for mobile devices;

2.9 The front window of the cleanroom is a manual window made of 5mm thick tempered glass, with a glass door and counterweight structure, featuring anti drop design, flexible and convenient opening up and down, and hovering at any height within the travel range;

2.10 Fan with 8-speed speed regulation, suitable for different types of experiments;

2.11 Interlocking function between ultraviolet lamp, fan, and fluorescent lamp, which means that when the fan and fluorescent lamp are working, the ultraviolet lamp cannot be turned on to protect the operator;

2.12 Equipped with UV lamp and fan reservation timing function;

2.13 It has a pressure unit conversion function to switch units between PA and m/s;

2.14 The delay time for turning on the ultraviolet lamp can be adjusted between 5 and 20 seconds to protect the safety of operators;

2.15 Comprehensive alarm system:

(1) Set the safe height of the front window opening and sound an alarm when it is below or above the safe height to ensure stable performance of the equipment during use;

(2) Filter pressure high alarm: An alarm is triggered when the resistance of the filter increases;

(3) Filter failure replacement alarm: When the service life of the filter expires, there will be a filter replacement alarm;

(4) Wind speed alarm: An alarm is triggered when the airflow fluctuation on the clean bench is below 20% of the nominal value;

2.16 Fuma caster design, convenient for cabinet movement and fixation.

3. Certification qualifications

3.1 BSI British Standard ISO 9001, ISO 13485 Quality Management System Certification;

3.2 ISO14001 Environmental Management System Certification;

3.3 ISO45001 Occupational Health and Safety Management System Certification;

3.4 Possess a medical device registration certificate, registration certificate number: Lu Xiang Zhu Zhun 20182220135;

3.5 A test report issued by a laboratory accredited by the State Food and Drug Administration in accordance with the standard GB/T 18268.1-2010 Electromagnetic Compatibility Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 1: General Requirements.